Set for transfusion of blood, blood substitutes and infusion solutions PK-2102 disposable systems are used for transfusion of blood, infusion solutions and blood substitutes.
Disposable systems are used for blood transfusions, infusion solutions and blood substitutes.
The system is sterile and pyrogenic, packed in a sterile plastic bag for single use.
• The tube is made of polyvinyl chloride;
• Atraumatic needle with trihedral sharpening is made of austenitic medical steel;
• The dropper device is transparent and semi-rigid, which ensures fast and visually controlled filling;
• Filter to prevent unwanted particles from entering;
• The filter meets the requirements of the European standard to prevent foreign particles from entering the blood;
• Roller flow rate regulator;
• Elastic rubber adapter between the tube and the injection needle;
• Type of connection of the tube with the needle: Luer Lock;
• Sterile, pyrogenic, non-toxic;
• For single use;
• Individual packaging;
• Shelf life 3 years from the date of manufacture indicated on the package.
• The length of the tube is not less than 1500 mm;
• The size of the needle is 1.2 mm x 38 mm.
1. Open the individual packaging, close the flow regulator, remove the protective cap from the needle, insert the needle into the bag with blood components;
2. Fill the dropper to half the volume;
3. Release air from the extension tube of the system. Now the system is ready for blood transfusion;
4. If necessary, use an air duct;
5. You can adjust the flow rate using the regulator;
6. PC systems should be used only by qualified medical personnel in accordance with the rules of operation;
7. After use, dispose of in accordance with established regulations.